Digilent Usb Jtag Cable Driver Linux
This answer record provides an overview of how to manually install Digilent Programming Cable drivers. The Digilent plug-in software and cable drivers must be installed on your machine for you to be able to run the applications from the network. These instructions assume the cable driver installation has been selected when installing.
Hi steven, I’m luis and I have some troubles with a virtex5-based board of digilent (i think is the ML505 board), I followed your instructions but I couldn’t make it work. No devices found, the outcome of dmesg is this:“70 usb 1-4: new high speed USB device number 2 using ehcihcd” and that’s it! No ttyUSB device is detected on /dev.the outcome of lsusb is ” Bus 001 Device 002: ID 03fd:000d Xilinx, Inc. ” where it should be noted that the usb cable is a jtag-usb from Digilent. I’ve spent a lot of time in google and nothing works. My linux is kubuntu 11.10.
I think no driver is loaded of this device. Thanks for your attention. Maybe: (README)Dynamic Loader Configuration File (digilent-adept-libraries.conf):In order for applications that use the Adept Runtime to execute thedynamic loader must be able to find the shared libraries that theRuntime consists of.
The file “digilent-adept-libraries.conf” containsthe expected default installation path for both 32-bit and 64-bitRuntime libraries. Edit this file to contain paths that are appropriatefor your installation. The following commands, when executed withsuperuser privileges, will install the dynamic loader configurationfile in the appropriate location.cp -f digilent-adept-libraries.conf /etc/ld.so.conf.dchmod 644 /etc/ld.so.conf.d/digilent-adept-libraries.confOnce the dynamic loader configuration file has been installed it isnecessary to have the dynamic loader update its cache.
The followingcommand, when executed with superuser privileges, can be used to forcethe cache to be updated./sbin/ldconfig. I installed Adept on Fedora16. There is an apparent incompatibility with libusb1: crash occurs in this library. Adept works fine on f15, f14, etc. HelloTried this guide as well as several other, but still didn’t manage to see my ZedBoard. I am using Fedora 19, but after typing sudo djtgcfg enum I don’t get any result:vzakharov@localhost bin$ sudo djtgcfg enumvzakharov@localhost bin$In lsusb both chips are visible:Bus 002 Device 011: ID 0403:6014 Future Technology Devices International, Ltd FT232H Single HS USB-UART/FIFO ICBus 005 Device 004: ID 04b4:0008 Cypress Semiconductor Corp.Would appreciate any help. I’m just going round a circle.
Thanks in advance. I can’t seem to get the cable to work from the Xilinx Atrix-7 FPGA AC701 Evaluation Kit. This includes the digilent usb device that is soldered on the board. The thing is linux and the udev entries seems to work, except that the adept utils tells me that the device doesn’t exist.I even tried reading from the device to see what happens, and it reacted by producing a number of bytes of data.It is almost as if the djtgcfg utility doesn’t even scan the usb devices. Does it maybe expect the usb devices to exist in a different place?When I enter (also as root): djtgcfg enumNo devices found lsusbBus 003 Device 004: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UAST/FIFO IC ls -l /dev/bus/usb/003/004crw-rw-rw. 1 root root 189, 259 Jan 22 13:13 /dev/bus/usb/003/004.
Xilinx Jtag Programming Cable
Working withUBUNTU64 bits 16.04a cheap programmer saying it isID 0403:6014 Future Technology Devices International, Ltd FT232H Single HS USB-UART/FIFO ICThe Digilent ADEPT2 softwareDo not use the ‘deb rpm’ but the ‘zip’. It contains the (in runtime) the ftdidrivers. This lib is mandatory (did not check if there is an ubuntu version).No need to tweak the script for Kernel version 2.6. Fixed.Used stephano RR udev rules. Did not roll back.
Check the dftdrvdtch in the right path anyway!Franck.
Usb Jtag Cable Modem
Installing impact and the Digilent configuration cable drivers are not always asmooth task.